Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who appreciates the nimble heat control of gas cooktops, but requires an electric oven for baking? Discover a dual fuel range cooker that has the best of both worlds.
Many experienced home chefs prefer gas cooktops for their superior temperature control and the ability to use advanced cooking techniques such as charring. These powerful stoves are expensive particularly if they need an additional gas connection and an electrician for installation.
What is a 13amp plug?
If you own a dual fuel range cooker (also known as an electric and gas oven) is required, you'll need an appropriately rated 13 amp plug. The plug should be wired by a qualified electrician into the cooker ring.
This ensures that the current flowing through the plug is safe and not too high which could create an electrical fire danger. The current is controlled by a fuse within the plug. The fuse will blow as soon as it is overloaded. This safeguards the appliance from an overload of electricity.
The fuse is listed at 13 amps as indicated on the top of the plug. it indicates the maximum current that the plug is able to pass without causing harm to the appliance or overheating the socket. It is crucial that when replacing fuses you always use the same rated amperage as the original. You risk overheating a socket if you replace a fuse using a different rating.
A 13 amp fuse is likely to be a ceramic type, which is very robust and able to withstand the extreme temperatures generated by a range cooker. Ceramic elements are also fire-resistant and therefore a better choice over other kinds.
There are several ways to install a 13 amp plug. It can be connected to an existing live socket, and the flex then connected to it using a screw or plastic jaw-type cord clamp. The plug is then placed in a secure position and tightened, making sure that the cord clamp is secure.
Some plugs include a wiring diagram on cardboard over the pins, and these must be removed prior to connecting the wires. It is essential that the wires are cut to the proper length since leaving them too long can cause them to break when the plug cover is replaced. The earth wire must be the longest one to ensure that it is connected prior to the neutral and line pins.
How do I connect the 13amp plug?
The vast majority of dual fuel range cookers sold in UK are powered by a 13 amp plug. This is crucial because ovens can draw substantial current, while the standard plug sockets have a 10-amp rating.
In general new appliances should be fitted with a plug at the point-of-sale. This is to ensure compliance with the Plugs and Sockets etc. (Safety Regulations) 1994. Older appliances may not have a plug connected and this could be the reason for the issue.
When connecting the cooker to an existing plug socket, the first step is to check that the rating of the fuse inside the fuse box is the same as that of the plug's. This is very important since a faulty sized fuse could pose a risk.
It is also recommended to ensure that the fuse is fully seated within the cartridge and that there is no excessive movement within it. The next step is to prepare the flex to be used. First remove the sheathing from the flex in order to expose the three conductors that are insulated within. Utilize a utility knife to nick the sheathing just beyond the grip of the cord at the entry point of the plug. The blade will not be able to penetrate the insulated conductors. The nick should be large enough to allow the sheathing to split and enlarge the nick when it is pulled back, revealing the cable underneath. Cut off the excess sheathing leaving around 40mm beyond the flex.
The flex is placed over the plug, with the earth terminal on top and the neutral and live terminals at the bottom. Using the conductors with the colors to guide you to the right direction, the sheathing should be removed from each pin, and the internal cable is fixed into the appropriate terminal using the cord grip. If the plug has an attached cord clamp that is screw-type, let it loosen and then pull the insulation back to reveal the copper wires. Connect each wire insulated to the appropriate terminal by using the channel in the plug. Start with the earth conductor, then the neutral, and finally, the live.
What is the maximum current draw of a plug with 13amps?
The maximum current draw for a 13amp plug at 230volts is 3kw. This is a large amount of power, however the standard fuse in the UK plug will not fail until the cable reaches a dangerous temperature. A faulty plug or socket can result in a fire, therefore it is important to be vigilant about the amount of power you use particularly in the kitchen.
The fuse inside the plugtops are made of ceramic, about 25mm in length and rated 240V mains. They will have a BS kitemark or similar marking on the side and contain sand. Glass or plastic alternatives are available, but should not be used in conjunction with live plugs.
In the UK the majority of dual fuel range cookers are hardwired. They are not able to plug directly into a wall outlet. They are typically connected through a separate cooker circuit which is suitable only for appliances with a maximum of 20 amps.
You can verify the ring circuit in your home by examining the fuse box or asking a local electrician. They will be able to inform you if the sockets in your home are connected to the same ring, or if they are separate and if there is a dedicated circuit for your oven.
If you're in the market for a brand new dual fuel range cooker the size of your kitchen is a crucial factor to consider. We offer a broad selection of cookers that can be adapted to any space. Pick from compact 50-60cm dual-fuel models or vast 90cm+ double ovens by leading brands such as Rangemaster and StovesAreUs.
We also have a broad range of multifunction gas and electric cookers. These versatile machines let you cook a variety of dishes including curries, casseroles, and pasta!
Explore ebay range cookers dual fuel of Cookers in Currys online or head in-store to browse. We offer free home installation and delivery on selected range cookers as well as flexible payments options. If you have any queries our team is available to assist by sending us an email or give us a call. Credit is subject to status, and terms and condition apply.
What is the maximum current draw of a cooker switch?
There is a lot of confusion about what the maximum current draw of a cooker switch actually is. The fact is, most cookers aren't made to plug into a standard socket, but instead are wired hard and connected to a specific oven ring circuit. This is due to the fact that they usually consume more than 20 amps when the electric hob and gas oven are used.
You will not find dual fuel range cookers that are able to be fitted in a standard socket as this would pose an enormous fire risk and violate electrical regulations. A licensed electrician should install new electrics in the kitchen, connecting them to an oven. They will also ensure that the total load of the oven and hob do not exceed the circuit's supply capacity.
Dual fuel range cookers combine the ability to cook with the sensitivity of a gas stove with the precision and accuracy of an electric oven. This is the reason they are highly sought-after by chefs and cooks at home alike. If you are looking to experiment with different cooking techniques, such as searing and charring, a dual fuel range cooker is the best option.
When purchasing a new range cooker you'll need to take into consideration a number of factors like size, performance and cost. Additionally, you'll also need to make sure that your house has an appropriate gas hook-up to the appliance. If you're unsure you're not sure, it's recommended to have a Gas Safe engineer inspect your property prior to installation.
Currys dual fuel range cookers come with a variety of models that will fit all budgets. From affordable models from Indesit and Zanussi and our own Essentials collection. If you're looking for something more sophisticated We have a range of premium JennAir models, that come with several new features.
When you purchase a new dual fuel range cooker, it's important to check the manual of the owner for specific information regarding the electrical and gas requirements. You will need to make sure that your home has a gas hook-up that is suitable, and you may need to have a plumber install this for you if it is required. Depending on your home, you will also need to ensure that you have a cooker ring circuit in place and approved by a qualified electrician.